first mod release

This commit is contained in:
Thomas Weinhold 2022-02-06 16:57:48 +01:00
commit 5e770d7c42
19 changed files with 294 additions and 0 deletions

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

63
drivetrain.ini Normal file
View file

@ -0,0 +1,63 @@
[TRACTION]
TYPE=RWD ; Wheel drive. Possible options: FWD (Front Wheel Drive), RWD (Rear Wheel Drive)
[GEARS]
COUNT=7 ; forward gears numbe
GEAR_R=-3.1000 ; rear gear ratio
; forward gears ratios. must be equal to number of gears defined on count
GEAR_1=4.2
GEAR_2=2.8
GEAR_3=1.867
GEAR_4=1.244
GEAR_5=0.83
GEAR_6=0.553
GEAR_7=0.553
FINAL=3.37 ; final gear ratio
[DIFFERENTIAL]
POWER=1.00 ; differential lock under power. 1.0=100% lock - 0 0% lock
COAST=1.00 ; differential lock under coasting. 1.0=100% lock 0=0% lock
PRELOAD=50 ; preload torque setting
[GEARBOX]
CHANGE_UP_TIME=250 ; change up time in milliseconds
CHANGE_DN_TIME=300 ; change down time in milliseconds
AUTO_CUTOFF_TIME=200 ; Auto cutoff time for upshifts in milliseconds, 0 to disable
SUPPORTS_SHIFTER=1 ; 1=Car supports shifter, 0=car supports only paddles
VALID_SHIFT_RPM_WINDOW=200 ; (200) range window additional to the precise rev matching rpm that permits gear engage.
CONTROLS_WINDOW_GAIN=0.4 ; multiplayer for gas,brake,clutch pedals that permits gear engage on different rev matching rpm. the lower the more difficult.
INERTIA=0.2 ; gearbox inertia. default values to 0.02 if not set 7
[CLUTCH]
MAX_TORQUE=6000 ; Clutch torque 6440
[AUTOCLUTCH]
UPSHIFT_PROFILE=UPSHIFT_PROFILE ; Name of the autoclutch profile for upshifts. NONE to disable autoclutch on shift up
DOWNSHIFT_PROFILE=DOWNSHIFT_PROFILE ; Same as above for downshifts
USE_ON_CHANGES=1 ; Use the autoclutch on gear shifts even when autoclutch is set to off. Needed for cars with semiautomatic gearboxes. values 1,0
MIN_RPM=600 ; (400) - Minimum rpm for autoclutch engadgement
MAX_RPM=1800 ; (600) - Maximum rpm for autoclutch engadgement
[UPSHIFT_PROFILE]
POINT_0=20 ; Time to reach fully depress clutch
POINT_1=260 ; Time to start releasing clutch
POINT_2=350 ; Time to reach fully released clutch
[DOWNSHIFT_PROFILE]
POINT_0=10 ; Time to reach fully depress clutch
POINT_1=350 ; Time to start releasing clutch
POINT_2=600 ; Time to reach fully released clutch
[AUTOBLIP]
ELECTRONIC=0 ; If =1 then it is a feature of the car and cannot be disabled
POINT_0=10 ; Time to reach full level
POINT_1=250 ; Time to start releasing gas
POINT_2=300 ; Time to reach 0 gas
LEVEL=0.1 ; Gas level to be reached
[AUTO_SHIFTER]
UP=1800
DOWN=1200
SLIP_THRESHOLD=1.1
GAS_CUTOFF_TIME=0.28

19
electronics.ini Normal file
View file

@ -0,0 +1,19 @@
[ABS]
SLIP_RATIO_LIMIT=0.10 ; Slipratio limit before ABS engages
CURVE= ; Slipratio lookup table with different slipratio limits, in order to define ABS levels if present. Leave blank for a single level given by above line. ctrl+A to toggle
PRESENT=0 ; 1 if present in car, 0 if not present (ABS always work if ABS assist is activated from realism menu UI)
ACTIVE=0 ; 1 will make the car start with ABS active (if present), 0 will make the car start with ABS inactive (even if present). ctrl+A to toggle
RATE_HZ=100 ; ABS pulse frequency. It's better to insert the actual ABS pumps refresh rate, than the ECU and sensors frequency
[TRACTION_CONTROL]
SLIP_RATIO_LIMIT=0.12 ; Slipratio limit before TC engages
CURVE= ; Slipratio lookup table with different slipratio limits, in order to define TC levels if present. Leave blank for a single level given by above line. ctrl+T to toggle
PRESENT=0 ; 1 if present in car, 0 if not present (TC always work if TC assist is activated from realism menu UI)
ACTIVE=0 ; 1 will make the car start with TC active (if present), 0 will make the car start with TC inactive (even if present). ctrl+T to toggle
RATE_HZ=100 ; TC pulse frequency. It's better to insert the actual TC pumps refresh rate, than the ECU and sensors frequency
MIN_SPEED_KMH=40 ; Traction control is set automatically OFF under the min speed value in km/h even if selected as assist by the user.
[SPEED_LIMITER]
SPEED_KMH = 259, "61 ; min, max
RATE_HZ = 20

3
final.rto Normal file
View file

@ -0,0 +1,3 @@
High|3.37
Medium|3.50
Low|3.64

209
setup.ini Normal file
View file

@ -0,0 +1,209 @@
[DISPLAY_METHOD]
SHOW_CLICKS=1
[GEARS]
USE_GEARSET=1 ; Defines what kind of gearset can be used in setup. 0 gives access to various gears sliders. 1 Gives you prefixed compilations of gearboxes
/////////////////////////////////////////////////////
;TYRES
/////////////////////////////////////////////////////
[PRESSURE_LF]
SHOW_CLICKS=0
TAB=TYRES
NAME=Pressure LF
MIN=45
MAX=72
STEP=1
POS_X=0
POS_Y=2
HELP=HELP_LF_PRESSURE
[PRESSURE_RF]
SHOW_CLICKS=0
TAB=TYRES
NAME=Pressure RF
MIN=45
MAX=72
STEP=1
POS_X=1
POS_Y=2
HELP=HELP_RF_PRESSURE
[PRESSURE_LR]
SHOW_CLICKS=0
TAB=TYRES
NAME=Pressure LR
MIN=20
MAX=36
STEP=1
POS_X=0
POS_Y=4
HELP=HELP_LR_PRESSURE
[PRESSURE_RR]
SHOW_CLICKS=0
TAB=TYRES
NAME=Pressure RR
MIN=20
MAX=36
STEP=1
POS_X=1
POS_Y=4
HELP=HELP_RR_PRESSURE
/////////////////////////////////////////////////////
;SUSPENSION
/////////////////////////////////////////////////////
[SPRING_RATE_LF]
SHOW_CLICKS=0
TAB=SUSPENSION
NAME=Wheel rate HR
MIN=150
MAX=500
STEP=25
POS_X=0
POS_Y=1
HELP=HELP_HF_WHEELRATE
[SPRING_RATE_RF]
SHOW_CLICKS=0
TAB=SUSPENSION
NAME=Wheel rate HR
MIN=150
MAX=500
STEP=25
POS_X=1
POS_Y=1
HELP=HELP_HF_WHEELRATE
[SPRING_RATE_LR]
SHOW_CLICKS=0
TAB=SUSPENSION
NAME=Wheel rate LR
MIN=100
MAX=500
STEP=25
POS_X=0
POS_Y=6
HELP=HELP_LR_WHEELRATE
[SPRING_RATE_RR]
SHOW_CLICKS=0
TAB=SUSPENSION
NAME=Wheel rate RR
MIN=100
MAX=500
STEP=25
POS_X=1
POS_Y=6
HELP=HELP_RR_WHEELRATE
[ARB_REAR]
SHOW_CLICKS=0
TAB=SUSPENSION
NAME=ARB Rear
MIN=00000
MAX=12000
STEP=2000
POS_X=0.5
POS_Y=8
HELP=HELP_REAR_ARB
/////////////////////////////////////////////////////
;ALIGNMENT
/////////////////////////////////////////////////////
[TOE_OUT_LF]
SHOW_CLICKS=2
TAB=ALIGNMENT
NAME=Toe LF
MIN=-450
MAX=450
STEP=20
POS_X=0
POS_Y=1
HELP=HELP_LF_TOE
[TOE_OUT_RF]
SHOW_CLICKS=2
TAB=ALIGNMENT
NAME=Toe RF
MIN=-450
MAX=450
STEP=20
POS_X=1
POS_Y=1
HELP=HELP_RF_TOE
/////////////////////////////////////////////////////
;GEARS
/////////////////////////////////////////////////////
[GEAR_SET_0]
NAME=GEAR_SET1
GEAR_1=4.2
GEAR_2=2.8
GEAR_3=1.867
GEAR_4=1.244
GEAR_5=0.83
GEAR_6=0.553
GEAR_7=0.553
[GEAR_SET_1]
NAME=GEAR_SET2
GEAR_1=3.5
GEAR_2=2.574
GEAR_3=1.892
GEAR_4=1.391
GEAR_5=1.023
GEAR_6=0.752
GEAR_7=0.553
[FINAL_GEAR_RATIO]
RATIOS=final.rto
NAME=Final Gear Ratio
POS_X=0
POS_Y=0
HELP=HELP_REAR_GEAR
/////////////////////////////////////////////////////
;GENERIC
/////////////////////////////////////////////////////
[FUEL]
SHOW_CLICKS=0
TAB=GENERIC
NAME=Fuel
MIN=0
MAX=70
STEP=1
POS_X=0.5
POS_Y=0
HELP=HELP_FUEL
[FRONT_BIAS]
SHOW_CLICKS=0
TAB=GENERIC
NAME=Brake Bias
MIN=50
MAX=75
STEP=1
POS_X=0.5
POS_Y=1
HELP=HELP_BRAKE_BIAS
[STEER_ASSIST]
SHOW_CLICKS=0
TAB=GENERIC
NAME=Steer Assist
MIN=50
MAX=150
STEP=1
POS_X=0.5
POS_Y=3
HELP=HELP_STEER_ASSIST